RGB LED Strip Light - 5V DC power required (USB power cable included)

The RGB LED Strip Light including a controller and a handy remote that you can use to control light settings including colour (its RGB so has pretty much every colour), brightness, mode (including single colour, colour changing, pulsing, strobing) and on/off.

Power it by simply plugging straight into a standard USB plug or socket (5v DC only).

HOW TO POWER THE LIGHT

PLEASE NOTE!! EVERY light is tested before shipping and will be 100% functional. If you decide to power it using a 9v pedalboard supply, wires and potatoes, a 56v lawmower battery, 90% home-brew moonshine or something equally NOT what is detailed in this section, you'll likely end up murdering your light... and you'll then own a dead light!

30 day warranty for lights

Every light is tested before it ships and should arrive in perfect working order. In the rare event the post office has been a little less than careful and your light is Dead On Arrival, I'll replace it, no problemo. Every light comes with a 30 day guarantee; if it fails during that time, return it to me and I'll replace it for free (and refund your shipping to send it back to me too). If your light dies after 30 days (unlikely to happen due to natural causes, as the LED lights are quite robust - but it can happen, as with any lights, due to mishandling, power problems etc), then I'd be happy to recommend a replacement if you wish to order one yourself, or you can just purchase the light alone from the site.

CHANGE OF SPECIFICATIONS: PLEASE NOTE!

Lights may differ from those shown and specification is subject to change without notice, as suppliers change all the time. BUT lights will always be of the same quality and offer the same functionality as shown.